Conventional inspections using ropes or scaffolding are hazardous, costly, and time-consuming. Intelligent robotic solution enables measurements, while precise contact-based inspections meeting industry standards, such as ultrasonic thickness.
- 0.08–635 mm range with 0.01 mm standard resolution.
- 20°C to 60°C continuous (up to 80°C intermittent); high temperature up to 500°C.
- Single-element, dual-element, pulse-echo, and echo-to-echo.
- Modular transducer and gauge, easy calibration, real-time A-Scan, and 25-Grid scanning.
- True-stabilized surface attachment with ±90° mounting, compliance for curved surfaces, pipes, and stiffeners.
- Optional surface preparation tools and extended reach for tight corners.
- Front-mounted stabilized 2DoF gimbal with +/-90 degrees field of view.
- Sony full-frame camera, 61 MP (9504 × 6336 px).
- Thermal imaging with 160 × 120 resolution.
- LiDAR distance sensor for precise measurements.
- Laser POI pointer for accurate marking
- 32-channel resolution for fine detail in point clouds, with 128 channel resolution option.
- Up to ~200 m maximum range.
- Range resolution within a few centimeters; high precision at short to medium distances.
- Features: SLAM for stable flight, real-time point cloud, 3D mapping, POI location tagging, and flaw sizing
- Continuous monitoring of hazardous gasses (LEL) through the operation
- Butane
- Ethane
- Methane
- Octane
- Pentane
- Propane
- Non-contact inspection, no couplant.
- Minimum detection thickness: 1.5 mm
- Tolerant to coatings (up to 4 mm), oxidation, and surface roughness
- 60°C continuous, up to 120°C intermittent; optional high-temperature version up to 700°C
- Ferrous and non-ferrous substrates (magnetic and eddy current)
- 0–5000 µm range
- Accuracy:1 µm; resolution:0.1 µm (1 µm for >100 µm).
- Temperature: -10°C to 60°C
- Minimum curvature: 5 mm
Right after the inspection, your data is instantly available on AveSoft, giving you immediate insights and the ability to generate professional reports in just a few clicks.
AveSoft creates a digital twin of the inspected asset, enabling you to revisit and repeat the inspection virtually. This allows you to capture and review any details that may have been overlooked during the initial inspection.
